330-14 Hyundai HCE O-RING

High Precision Tapered Roller Bearings 33005 33006 33007 33008 33009 33010 33011 33012 33013 33014 33015 33016 17 18 19 20 21 22 24 26 28 30 High Speed(33010 50x80x24)
LNYTQG 1.Structural Features: Both inner and outer rings feature tapered raceways, with truncated cone-shaped rolling elements. The inner ring, outer ring, rolling elements, and cage collectively form a complete, separable assembly. || 2.Load-bearing capacity: Capable of simultaneously withstanding radial loads and unidirectional axial loads. Axial load capacity increases with contact angle; a larger contact angle makes it suitable for applications where axial loads constitute a higher proportion. || 3.Applicable Conditions: Commonly used in machinery subjected to combined loads, such as automotive hubs, axles, and gearboxes, as well as machine tool spindles and mining equipment. Particularly suitable for low-to-medium speed applications involving impact or vibration. || 4.Installation Requirements: Adjust the clearance during installation (achieved through relative axial displacement between the inner and outer rings). Excessive clearance may cause vibration and noise, while insufficient clearance may accelerate wear due to increased heat generation. A suitable locking device must be used in conjunction. || 5.Performance Limitations: Cannot withstand bidirectional axial loads. For bidirectional load-bearing requirements, must be installed in pairs with opposing directions.

Timken Tapered Roller Bearing Assembly - 33014
TIMKEN Title of first bullet point: Timken Tapered Roller Bearing Assembly - 33014 || Title of second bullet point: High radial and axial load carrying capacity || Title of third bullet point: Accommodates axial loads in one direction || Title of fourth bullet point: Low friction and long service life || Title of fifth bullet point: Separable and interchangeable components || Title of sixth bullet point: Bore diameter: 2.756 inches || Title of seventh bullet point: Item weight: 2.351 pounds || Title of eighth bullet point: Outside diameter: 4.331 inches || Title of ninth bullet point: Width: 1.22 inches || Title of tenth bullet point: Manufactured by SKF

High Precision Tapered Roller Bearings 33005 33006 33007 33008 33009 33010 33011 33012 33013 33014 33015 33016 17 18 19 20 21 22 24 26 28 30 High Speed(33005 25x47x17)
LNYTQG 1.Structural Features: Both inner and outer rings feature tapered raceways, with truncated cone-shaped rolling elements. The inner ring, outer ring, rolling elements, and cage collectively form a complete, separable assembly. || 2.Load-bearing capacity: Capable of simultaneously withstanding radial loads and unidirectional axial loads. Axial load capacity increases with contact angle; a larger contact angle makes it suitable for applications where axial loads constitute a higher proportion. || 3.Applicable Conditions: Commonly used in machinery subjected to combined loads, such as automotive hubs, axles, and gearboxes, as well as machine tool spindles and mining equipment. Particularly suitable for low-to-medium speed applications involving impact or vibration. || 4.Installation Requirements: Adjust the clearance during installation (achieved through relative axial displacement between the inner and outer rings). Excessive clearance may cause vibration and noise, while insufficient clearance may accelerate wear due to increased heat generation. A suitable locking device must be used in conjunction. || 5.Performance Limitations: Cannot withstand bidirectional axial loads. For bidirectional load-bearing requirements, must be installed in pairs with opposing directions.