FRONT AXLE DIFFERENTIAL CARRIER
Parts on group FRONT AXLE DIFFERENTIAL CARRIER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4460-205-226 | [1] | HOUSING-AXLE | |
| 2. | 0750-117-179 | [1] | BEARING-TAPER ROLLER | |
| 2. | 0635-501-171 | [1] | RING-INNER BEAR | |
| 2. | 0635-501-051 | [1] | RING-OUTER BEAR | |
| 3. | 4407-301-137 | [1] | SHIM(2.0T) | S:2.0 |
| 3. | 4407-301-138 | [1] | SHIM(1.8T) | S:1.8 |
| 3. | 4407-301-139 | [1] | SHIM(1.5T) | S:1.5 |
| 3. | 4407-301-140 | [1] | SHIM(1.2T) | S:1.2 |
| 4. | 0750-117-177 | [1] | BEARING-ROLLER | |
| 4. | 0750-117-346 | [1] | BEARING-ROLLER | |
| 5. | 0750-117-354 | [1] | BEARING-TAPER ROLLER | |
| 6. | 0750-117-346 | [1] | BEARING-ROLLER | |
| 7. | 4460-355-075 | [2] | NUT-ADJUSTING | |
| 7. | 4460-355-177 | [2] | BEARING-ROLLER | |
| 8. | 0631-329-071 | [2] | PIN-SLOT | |
| 9. | 0634-309-091 | [1] | SEAL-SHAFT | |
| 10. | 0730-103-894 | [1] | WASHER | |
| 10. | 0730-105-558 | [1] | WASHER | |
| 11. | 0737-006-075 | [1] | NUT | |
| 12. | 4472-355-054 | [1] | BUSH | |
| 12. | 0730-161-691 | [1] | RING(16.0) | |
| 12. | 0730-161-692 | [1] | RING(16.1) | |
| 12. | 0730-161-693 | [1] | RING(16.2) | |
| 12. | 0730-161-694 | [1] | RING(16.3) | |
| 12. | 0730-161-695 | [1] | RING(16.4) | |
| 12. | 0730-161-696 | [1] | RING(16.5) | |
| 12. | 0730-161-697 | [1] | RING(16.6) | |
| 12. | 0730-161-698 | [1] | RING(16.7) | |
| 12. | 0730-161-699 | [1] | RING(16.8) | |
| 12. | 0730-161-700 | [1] | RING(16.92) | |
| 12. | 0730-161-701 | [1] | RING(17.01) | |
| 12. | 0730-161-702 | [1] | RING(17.10) | |
| 12. | 0730-161-703 | [1] | RING(17.2) | |
| 12. | 0730-161-704 | [1] | RING(17.3) | |
| 12. | 0730-161-705 | [1] | RING(17.4) | |
| 12. | 0730-162-676 | [1] | RING(16.83) | |
| 12. | 0730-162-677 | [1] | RING(16.86) | |
| 12. | 0730-162-678 | [1] | RING(16.89) | |
| 12. | 0730-162-679 | [1] | RING(16.95) | |
| 12. | 0730-162-680 | [1] | RING(16.98) | |
| 12. | 0730-162-681 | [1] | RING(17.04) | |
| 12. | 0730-162-682 | [1] | RING(17.07) | |
| 13. | 4460-305-034 | [1] | FLANGE-INPUT | |
| 14. | 4460-355-194 | [1] | SHEET-PROTECT | |
| 15. | 0736-020-084 | [8] | SCREW | |
| 16. | 4460-255-356 | [1] | GEAR SET-BEVEL | |
| 17. | 4461-253-519 | [1] | CASE-DIFFERENTIAL | |
| 18. | 4461-351-022 | [2] | GEAR-AXLE BEVEL | |
| 19. | 0730-105-019 | [2] | WASHER-THRUST | |
| 20. | 4461-351-023 | [4] | GEAR-DIFF BEVEL | |
| 21. | 0730-105-018 | [4] | WASHER-THRUST | |
| 22. | 4461-301-007 | [1] | SPIDER-DIFFERENTIAL | |
| 23. | 0636-020-165 | [4] | SCREW | |
| 24. | 0636-020-237 | [8] | SCREW | |
| 25. | 0631-328-588 | [4] | PIN-SLOT | |
| 26. | 0631-328-587 | [4] | PIN-SLOT |
